Μεταχειρισμένα μηχανήματα: ρομπότ

A robot cell with 2x Stäubli grinding robots is available. The robots were used for steel grinding. Robot specifications: Axes: 6, payload: 14 kg, reach: 1900 mm, repeat accuracy: ±0.05 mm, control: ...

This Epson G6-653S Robot was made in the year 2017 in Japan. It has a max payload of 6 kg.
General Data
Machine weight: 28 kg


Machine Benefits
Technical Machine ...

This EPSON G10 854P Robot was manufactured in the year 2021 in Japan. The machine has a Maximum payload of 10 kg.
General Data
Machine weight: 48 kg


Machine ...

This ABB IRB140 - IRC5 Robot was manufactured in Sweden in 2008.
General Data
Machine weight: 150 kg

This KUKA KR60 HA - KRC2ed05 Robot was manufactured in the year 2011 in Germany. It is equipped with a KUKA control unit. The machine has a reach of 2033 mm.
General Data
Machine weight: ...

This Yaskawa Motoman YR-MPL0160-B04 Robot was manufactured in the year 2010 in Japan. The machine has a payload of 160 kg.
General Data
Machine weight: 1700 kg


Machine ...

This Kuka Kr16 Robot was manufactured in the year 2006. It is equipped with a Kuka KRC Software control unit.
Control Unit
Brand: KUKA
Model: KRC Software


Machine ...

This ABB IRB 4600 Robot was built in 2002. The robot has a reach of 205 cm and a capacity of 60 kg. Is new, never used.
General Data
Machine weight: 506 kg

Additional ...

This Kuka LBR iiwa 7 Robot was made in 2022 in Germany. It has a nominal payload of 7 kg, a maximum reach of 800 mm, and 7 axes. The front flange has both pneumatic and electrical connections ("MF ...

This ABB IRB1600 Robot was manufactured in the year 2016 in Sweden. The machine has a hand capacity of 10 kg.
General Data
Measurements width: 484 mm
Measurements depth: 648 mm

This ABB IRB 6600 M2004 Robot was manufactured in the year 2007 in Sweden.
General Data
Machine weight: 1780 kg


Machine Benefits
Technical Machine Benefits:

This REIS ROBOTICS Robot System - RDT 40 / SRV 6 / RDT 40 was manufactured in the year 2001. It is a 6-axis robot system with 2 stations operated with each tilt and turn module having a load capacity ...

This COMAU C4G SMART NH3-210-3.1-SH Robot machine was manufactured in 2007. It is a welding robot and it is controlled by a COMAU TP4i interface and weighs 2280kg. Contact us anytime for further ...

This FANUC ARC Mate 100i Robot machine was manufactured in 2000. It has 6 axes and a payload capacity of 6 kg (13 lbs). It offers a reach of 1368 mm (54 in) with a repeatability of ±0.1 mm (.0039 ...

This ABB IRB 460-110/2.4 Robot was built 2020 in Sweden. It operates with 4-axis, 110kg of payload and 2400mm of reach. At its current location there are 4 units available. The robots are not in ...

This MITSUBISHI PR-5AH Robot was manufactured in the year 2004. The machine has 3 axis. Includes full documentation of the associated software and a software CD, gripper arm, control unit, remote ...

This Fruitcore HORST 1400 Robot was manufactured in the year 2021 in Germany. It has 6 axis. The machine has a maximum load capacity of 10 kg.
General Data
Machine weight: 75 kg

This KUKA Palletizing System was manufactured in the year 2007 by emt automation. The system is designed for the automatic palletizing of carton and bagged goods. Handling is performed by a KUKA robot ...

This YASKAWA Motoman MA1900 Robot welding station machine was manufactured in the year 2012. It is included with 3 stations: Robot Motoman MA1900, DX 100 control system and Welding machine Lorch ...

This KAWASAKI RS006L Robot machine was manufactured in the year 2020 in Denmark. It is equipped with a Kawasaki F60 / E71 Controller and has 6 axis.
General Data
Machine weight: 600 kg

This YASKAWA 6VX88 Robot machine was manufactured in the year 2020 in Japan. It is equipped with 6 axis and has a safety control (YRC100).
General Data
Machine weight: 630 kg

This KUKA KR-240-2 Robot was manufactured in 2005 in Germany. It has an arm length of 1100 mm, a max. payload of 240 kg and a total balanced load capacity of 640 kg. See full tech specs as PDF ...

This Halter Automation Load Assistant S-180-20 Robot was manufactured in the year 2018. The machine has a minimum workpiece of 40 mm x 40 mm.

Machine Benefits
Technical Machine ...

This MIGATRONIC CoWelder + PI 350 AC/DC WIG Welding machine was manufactured in the year 2022 in Denmark. It is equipped with an UNIVERSAL ROBOTS UR10 robot arm. This machine dispose of a cooling ...

This YASKAWA MA2010 Welding Station Robot was manufactured in the year 2019 in Japan. It is equipped with a Lorch S8 RoboMig XT control unit and with a DX200 Master controller. The machine dispose of ...

This IGM Welding Robot System was manufactured in the year 2006 in Germany. It is a complete system with robot (KUKA), 2x manipulator, welding machine and extraction system. The first system is ...

This ABB IRB 4600 M2004 Robot was manufactured in the year 2021 in Sweden. It is equipped with a IRC5 M2004 and has 6 axis. The machine has a Reach of 2.55 meters and a payload of 40 kg.
General ...

This ABB IRB 4600 Robot was manufactured in the year 2016 in Sweden. It is equipped with a IRC5 singel control unit and has 6 axis. The machine has a payload of 40 kg and a reach of 2.55 meters.

This KUKA KR700 PA was manufactured in 2021. Originating from Germany with a load capacity of 700 kg and a reach of 3320 mm, it weighs 33850 kg and is powered by the compact KR C4 controller. It is ...

This KUKA KR 8 R1420 arc HW robot was manufactured in 2016. Originating from Germany with a load capacity of 8 kg and a reach of 1421 mm, it weighs 179 kg and is powered by the compact KR C4 ...

There are 7 ready-to-load robots from the manufacturers Kuka and ABB available. 1) ABB IRB 1600-6/1,45: Year of construction: 2014, operating hours: approx. 24000h, running noises on axis no. 2. 2) ...

This 7-axis Hahn Robotics CAT Final Check EOL robot, manufactured in 2021, features a Denso robot with a rotary table and a Siemens S7-1500 controller. It boasts a high-capacity optical testing ...

2 test facilities with a Yaskawa test robot each are available. Load capacity: 7kg, reach: 927mm, repeatability: ±0.03mm, weight: 34kg. Axis speeds: S-axis: 375°/s, L-axis: 315°/s, U-axis: 410°/s, ...

A robot arm with gripper finger and camera is available. Sensor skin collaborative operation is possible. Reach: 911mm, repeat accuracy: +/-0.03mm, adjustable gripping force: 40Nm-120Nm, max. ...

There are 4 Kuka robots with various grippers, control cabinets, housing and conveyor technology (Interroll) available. Designed for handling a power unit of wallboxes and handling the entire wallbox. ...

KUKA robots are used in a wide range of applications, e.g. handling, welding, assembly, packaging and other automation tasks. Payload: 10kg, reach: 900mm, weight: 52kg. On-site inspection is ...

Process paths (X/Y/Z): 300mm/320mm/100mm, 3-axis interpolated, 16 inputs and 16 outputs, programming control panel, memory card, with CE.
ULTRASAVER dosing kit: pressure range: 0-7bar, ...

Complete automated system
with bin-pick cell incl. two cameras for picking up the parts in the bin with Stäubli TX 90XL
CS8C controller for handling the parts from the bin.
2x ...

Number of axes: 6, reach: 3100mm, max. load capacity: 125kg, controls: FANUC SYSTEM R-30iB Plus, weight: 1.115t, operating hours counter: ca. 100h, with control system, an inspection is possible.

KUKA robot for Robotic H-bone cutting of pork carcasses for sale
RHC robot from Aira/Banss with an Kuka robot system in it.
This robot is in use in our slaughterhouse since 2008 and has ...

KUKA palletising robot for sale, year 2012.
Is specially equipped for palletizing corrugated cardboard boxes, as used in the folding box industry.

Specialities
Plant can ...

KR60L30-3 Robot like NEW (unused)
KR C4 Control
Gripper from Schunk
Year of construction 2018, the robot was currently delivered new but was never put into operation.

Max. load: 240kg, weight: 1.267t, with controls, was maintained regularly, an inspection is possible.

Ref.Nr.: INNO26237

There are ten Industrial Robots ABB IRB 6400 und four ABB IRB 4600 available.

Ref.Nr.: INNO26215

Kuka
Typ: KR 10 R1100 sixx CR / KR C4 compact
Industrieroboter
Max. Gesamttraglast 10 kg
Anzahl Achsen 6
Zahl der steuerbaren Achsen 7
Max. Reichweite 1101 mm

KEBA ABB
Typ: SX Teach Pendant Unit-2 16/64
Teach Pendant Programmierhandgerät für ABB Roboter
3HAC023195-001 /03
Typ: SX Teach Pendant Unit-2 16/64
Zustand: gebraucht ...

As good as new, reach: 850mm, payload: 5kg, repeat accuracy: 0.03mm, weight: 20.6kg. With teach panel, control box, manuals. On-site inspection is possible.

Ref.Nr.: INNO26199

Robot type: #KR240R2700 PRIME C4 FLR
Manufacturing year: 09/2012
HMI version: 8.1.0.25 B123
Kernel system version: KS V8.2.123
Robot runtme: 4014.38h

KRC4 ...

ABB
Typ: Roboter IRB 340 / Steuerung IRC5 M2004
ABB Roboter FlexPicker Delta4 IRB 340
mit Steuerung IRC5 M2004
Traglast 1 kg
Positionsgenauigkeit: 0,1mm

Comau 6-Achsroboter Smart 5 NJ110-3.0
Technische Daten NJ-110-3.0
Anzahl Achsen6
Maximale Gelenknutzlast (kg)110
Zusätzliche Vorderarmlast (kg)50
Maximale horizontale ...